home Fix label Video label_important Televisions category Symphonic

Lost remote for WF2703 Symphonic need to get to input mode!?

Can you get to input mode without remote? If so how?

Len, June 2006

home Fix label Video label_important Televisions category Symphonicdone

There's really no way to put in game mode from the buttons on the bottom, unless of course your tv goes automatically into it when you go thru all the channels. But if you buy an GE 24991 universal remote it works PERFECTLY for my TV. The remote code that worked for me was 1381. But if that doesn't work for you DO NOT search more online, just call GE. They'll help you out.

happyday, September 2016

You can also do what I did punt is out of my twostory window

ZG0D, May 2013

Press the menu button and then press the up button on volume. This will turn on the game mode. (down volume button will turn off the game mode)We then bought a universal remote and programed it. Make sure the universal has an input button. Press tv on the universal and then press input. It will change to game mode automatically. Press input again and it will go back to regular tv.

Big Chief, December 2011

lost remote control to Symphonic wf2703 tv, need to get tv to VRC mode in order to watch videos. HElp

Joanne, March 2011

rca universal remote will work and just press antenna button

the doc, December 2010

GE universal remote -- code 0189 works for me. everything works great.

DMWill, September 2009

I tried doing this, I had the same problem. I didn't work. I tried different remote controls - I finally gave up and order a new remote from the manufacturer. try Mr Remote website.

Roger, August 2009

To switch between the game/tv on Symphonic WF2703,
Press MENU, then the volume UP button to switch back and forth. I had this problem before and bought a new universal remote then discovered it by accident -Kiddnitro- :-)

Kiddnitro, July 2007

i need a remote for that model too but i cant seem to find the model number on the symphonic website

vish, March 2007

You could try pressing the channels down button on the set itself until you go below channel 1. Im not 100% sure if this will work for you but on some sets channel 0,-1,-2 are used as the input channels.

Steven Graham, June 2006

link Click here to see other fixes for Symphonic.