Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

Wiring of a Pull Cord Switch?

The pull cord switch in the Bathroom was broken -

So I brought a new one and took the old one out. To my surprise I found more cables than I thought -

I have three grey cables coming down from the void above -

1) has a Black, Red and Earth
2) has Black, Red and Earth
3) has Blue, Brown and Earth

The old one had the three earths together, both reds into the same, both backs into a block (can't remeber where the brown and blue went)

On the new unit I have L1 & C and Earth ?

Any ideas on which should be wired to which ?

Thank you
preecer1981, December 2010
The blue goes in the block with the blacks.
The brown goes with one of the reds in either COM or L1.

Adam, December 2010