Whenever I try to start it the start light lights up but moments later flashes. No programme will start. In the past it may have done this if the load is too heavy, but it wont start regrdless of load now.

Any one help?

Adam, March 2011

Hey thank you there was all sorts of stuff in there and lots of water came out. I cleared it and it seems to be working now. Thank you :)

Adam, March 2011

remove the filter at the bottom right corner behind the plastic kick plate and then look inside the filter housing with a torch and make sure the drain pump impeller rotates freely.Press and hold the start button in for 5 seconds and let the machine go through its reset program.when the ready light comes on try setting a new program and see what happens

ck, March 2011