On the F&P IW812, I have replaced the main control switch unit. Can you let me know if there is a wiring plug that goes to the solenoid and how to identify it. The service shop that was repairing my washer has closed down and I have bought the part and fitted. I believe there is a plug that activate the solenoid. Wiring Diagram might help.

Terry, May 2011

There should be a wiring harness with a single plug one end and 4 wires two red & two blue. The single end plugs in to the control module. The two blue wires plug in to the cold inlet solenoid & the two red wires plug in to the hot one.

Lincoln Appliance NZ, May 2011