3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

fitted new radiator - not working?

We fitted a new radiator and new thermostat in the living room, the rad is full of water - no leaks, but when all the other rads are on, this rad stays cool and even the pipes to it are cool? Don't understand it. We have bled all rads. We checked the thermostat bit in the middle goes up and down. Is there any thing else we can do?
R Slater, May 2011
try closing all other rads except the one not working and put heating on to force water through it, if it still wont work it could be a valve

toptrish, May 2011
Did you connect a supply 'out' pipe for continuence of the circuit?

KEith IN CORNWALL, May 2011
have you opened both valves fully on the ends of the rad?
switch the heating on and run it.you will probably find its air locked and a bit of heat expansion and running will save the day

A1, May 2011