I switched off my tv last night and tried to switch it back on today, it just doesnt seem to work, there is not power in the set??? here are the details of the tv: Goodmans , its a 21" Flat screen TV/DVD combi, and the moderl number is: TV D2150F

Ansar, September 2006

my 42 inch goodmans model nrgtv42p4 will switch on but cant get no picture any advise on how to fix the problem thanks

scott h, February 2012

I dont know how to connect the wii to my goodmans flat screen tv imm not sure what input it should be on or what to do. Thanks

Rachel, July 2010

Picture and sound jump, goes to 5 min countdown before it switches off, every channels the same

martin, November 2009

Sorry Pete. Switch off and disconect from the mains. Remove all the retaining screws from the rear of the set. 7 in all. Remove the other two screws adjacent to the Arial conector and one standing alone. This will release the back. Place the set face down on a flat surface on a towel or similar. Lift off the rear housing. BE VERY CAREFUL NOW. Youi will see that there are two screws holding a microswitch. Undo them and lift out the switch. I guess that the plastic conector plate will be snapped at its smallest cross section. Superglue support and replace. If its not that then the switch would be my next best guess.

Please be careful when attempting any maintenance. Although the TV is disconnected there are still live components.

TVMAN, November 2009

The microswitch which is activated when you press the on off switch on the outside has a very weak ABS connector bracket. The same happended to me and I have superglued it back. Worked fine until the wife got angry one morning and switched it off in a hurry. Broke again. But fixed by the super hero which is me.

Hope that helps

TVMAN, November 2009

same problem could it be on/off switch?

pete mitchell, November 2009