I have moved into a house with a glow worm boiler betacom 30c no instructions left in the house when I try to put the boiler on the 70 light flashes boiler will not start I have brough the water up to the required level I have looked for a reset button but could not find one the fuse is ok I have checked this I would really like to get hot water from the tap please if anyone knows how to fix this it would be great thank you
We have a Glow-Worm Betacom 30c and we're unable to figure out how to turn on the heating without the mobile thermostat. Can anyone help?
Antony, October 2014
presuming the fan to be running - could it possibly be a broken seal that affect the air pressure and therefore an error reported by the switch?
al, April 2014
I have th betacom 30c and there are 3 red led light ls on all the time. The hot water works and the heating works for about 5 mins then the
Boiler turn it's self off. Can any one help
Kev, December 2013
Hi i have a Betacom 30c boiler, and the 'fault with air pressure switch' light is flashing. I replaced the air pressure switch but keep on getting the flashing light. Can anybody give any assistance with this thank you
Bob, June 2013
this is flashing because there is a fault on air pressure switch,this can be found at very top rear of boiler connected to the fan
kurt, January 2012
I called out an engineer and the answer is that the air pressure switch was stuck engineer has released the button for now but is comming back with new parts
Lesley, October 2011
make sure the boiler pressure guage reads 1.5bar,if less the boiler will not fire up.
