Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Susan asked ... How can I stop my steam iron spraying water with the steam?    |    Click here to ask your question

zanussi f1045w aquacycle 1000?

lights on but nothing at all when dial turned for programmes
kevin, November 2011
the cheapest thing to replace is the door inter lock this mc is a few years old it should cost 20 to25
this is easy to fit
take door seal clip at the front off mc there are two screws that hold the inter lock on you will be able to pull gently the inter lock so you can see the wiring plug only take them off when you have the new one
PS make sure you unplug machine first

samsrepairs, November 2011
difficult to answer but could be a control pcb failure.Would need to test bits with meters before condemning it!!

ck, November 2011
link Click here to see other fixes for Zanussi.