3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

My indiset WD125 will not drain as i set it 2 drain?

My indiset WD125 will not drain as i set it 2 drain press the power button it gives 2slow flashes then 3fast flashes all that happens is the natural machine power on buzzing noise for approxmatly 3 or 4 mins then the program button starts moving round + machine is full of water
Paul wellings, November 2011
pump blockage, switch power off to washer.drain machine manualy by lowering drain hose into a bowl.remove lower back panel.follow the drain hose into the washer,the pump is on the end of the hose.you will see a black rubber pipe between the drum and the pump.remove that pipe where it joins onto the pump.squeeze together the spring clip to release and pull pipe off.check for any blockage in the pipe and make sure pump turns freely .if all appears ok,then suspect pump issue or associated wiring.only remove the front filter inspection cover as a last resort,if it hasn't been of for a while it will more then likely break.

pp, November 2011
link Click here to see other fixes for Indesit WD125.