my hotpoint WF3321 is only working on some numbers and even then it stops midcycle ,when it has pumped out water for the first of rinses and then it just stops and my door locked button just starts flashing after a while , only working on number 2 at moment but only goes as far a first rinse hope you can help

Heather, January 2012

if it is set for a rinse only and doesnt fill i would suspect a faulty cold water solenoid valve, if it is filling check the level of the emptying hose where it enters the standpipe, the end of the hose should only be about six inches from the top of the machine otherwise syphoning will occur

keymatic, January 2012