Whirlpool washing machine has a wery slow fill with cold water setting. Hot water works fine. Cold water supply works fine.

thank you for your help

Zen, January 2012

at the rear of the machine you will see the two feed pipes hot/cold,turn off your cold water supply.Then uodo the cold water pipe at the rear of the machine there u will find a small filter if its dirty clean it,also the supply pipe could be kinked thus slowing the water supply, check for kinks.ok

pat, January 2012

undo the fill hose at both ends and check filters for blockage before you refit the hose at washer end flush it, if you still have poor flow remove the filter in the solenoid and you will see a black rubber restrictor inside, remove this which will then give better flow

keymatic, January 2012