i have a ravenheat ls80 silver star, hot water only just gets warm when it eventualy fires up, relaced the dhw/ch sensor(the clip on type, the dhw gets hotter than it did before but i think it should be hotter than it
is, is their something else that needs to be changed.

question 2.
i have a leak from the presure gauge where it screws into thevalve body, tried to give it a tweak but the coiled pipe broke and water started leaking, i released the presure and unscrewed the nut the pipe has broken off, endless calls to plumbers but no joy, searched for the part its coming next day is there a special way to fit this gauge? sorry about the long questions.

.

bob, January 2012

"relaced the dhw/ch sensor.."
What about the temperature sensor, will be fitted in/on the HW outlet pipe.
Point 2 just be careful with the fine pipe, they are usually flare fitting, so just stick in the hole after making sure seat in the hole is clean.
You can always get an install manual download from Ravenheat web site, fault finding etc at back, plus how to fit/replace all parts.

SD, January 2012