Have a fisher and paykel pride MW511 clothes washer the machine turns on but will not complete the cycles it gets stuck when ever the cycle requires engagement of the agitation or spin function this is erratic and sometimes the cycle will start ie agitation with fill then gets stuck on soapy water out etc turning the machine of at the outlet has previously reset it but this no longer seems to work is this a water sensor or a control board your help appreciated

David, April 2012

My machine does not complete a full cycle. It gets stuck on the rinse part of the cycle. If I skip the rinse cycle the machine completes the full cycle.

Toothie, October 2012

Your description of fault is not very clear. More important is when it gets stuck does it display an error message? Does it start beeping and if it does then what lights are showing along the top row? Write down exactly which lights are on and which are off on the top row. Count from left to right, that is the error code. Post it back here.

Lincoln Appliance NZ, April 2012