andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

replace bass speaker in nsm satilite 200?

bass speaker needs replacing in my nsm satilite 200, how do i remove front panel to gain access to one of two 8" speakers,please help,i have workshop manual, but no help with this, regards, bob
BOB IBGWOOD, April 2012
Hi Bob,

I have done this recently so here goes.....

Remove all records and unplug and take out carriage. If possible lock the glass lid. Then make sure you have enuf room to tip the jukebox on its back (you may need a hand as it HEAVY!!). At the base where the wheels are. Remove all screws and the base should drop out. Now you have some access to bass speakers but there are more screws inside to undo and get full access to the main grille and mouldings etc. Once this done the grille and mouldings easily comes off the front. Measure old speakers and replace with new speakers....

NUTTYSTEVE, December 2012
link Click here to see other fixes for NSM Satilite 200.