Our Naxtra HNL 662 has developed a fault were when selecting a 40 degree wash for 45 mins and when pressing start the progress indicator panel defaults to the 15 minute mark. I suspect dirty switch contacts so I need to remove panel to access them to clean

Brian, February 2013

undo the lid, remove 2 side rails and remove 2x 7mm studs which are located at front l/h and r/h corners, there are 3 lugs which hold the panel around the soap box which need pressing out of the way, you can do this with a screw driver while pulling on the panel and it will release, its normally the selector thats dodgy

keymatic irl., February 2013