My BELLING MW60G microwave suddenly stopped working. I have checked the fuse in the wall plug and is fine. I understand there is a 10amp fuse inside the appliance but where is it ??

Thanks Ian

Ian, January 2015

Ok
Heres how and it's easy enough. and you avoid the capacitor Nasty little doodads they are :)
Remove your microwave from the kitchen cupboard housing { A helper is needed here to remove the plug from the wall socket } Remove the outer screws from the casing { Don't remove the screws in the chromed panel }. Theres 2 on the side too to be removed. No need to remove the outer casing just lift it and the fuse is there { If you are lucky you can just lower it back down but it's likely the front of the casing will come out too { It fastens under the front trim }
put the screws back in and bingo.
The fuse is 10amp 20mm

Ian, January 2015

Thank you

Ian, January 2015

Here's a link to a video that shows the fuse...

https://www.youtube.com/watch?v=IN0BqiVX5ds

Be careful when you mess around inside a microwave - dangerous radiation and very high voltages lurk inside - can be dangerous even when unplugged.

Take care..., January 2015