After attaching button hole foot and selecting 7 or 8 on touch screen. When I start the process the machine starts the end of the button hole and one side (long), once it gets to the other end it won't continue to sew the other (long) side. So therefore I have only one long side finished.

Michelle, March 2015

there is a lever on the left side of the shaft its silver with a tab and pic of a button hole on it. Pull the tab down, the buttonhole attachment will hit it and do a return for the other side of the hole. You stick a button into the slot and push it tight, if the button is a thin one I usually remove it and push the slot closer together for a smaller hole.
Also I will dial down the thread tension (2-3) so the zigzags are more even on the underside.
hope this helps

Rainy, May 2015