Need to know what country you are in & what voltage the power is where you are? In NZ at 230V the drain pump should be 33.5 ohms. A pump with only 15 ohms would damage the controller. That error code (if correct) is unusual & I would assume it was a software problem rather than a physical problem on the pcb. The new controller should come with an instruction sheet telling you what to check before installing the control board & how to set the size of the machine in to memory. Just be aware that if you are not a certified repair technician then F&P will not give you any warranty.
Lincoln Appliance NZ, December 2015
