GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

glowworm spacesaver mk 2 no hot water?

My problem is i have no or luke warm hot water, the central heating works fine. Its controlled by a randall 103 and a room stat,again they all appear to be ok. Dont have the glowworm manual as i`ve just bought house, the people before me of course said they had no problems. The worrying thing is is we are expecting a baby in Feb and will need water of course. I dont mind getting a plumber but a honest one is hard to find.
cheers
Derek, December 2006
definatly the diverter valve ive had this problem twice in the last 10 years and buying a new diverter valve has solved the problem

mark, January 2007
Your problem is most likely going to be either a zone valve or diverter valve on your system, check that it is opening, if there was a problem with your boiler it would not give you any heating either. If the valve is not opening you will see a lever on the casing move this to the manual position and lock it there and this should sort out your problem and if it works check there is power from the cylinder stat if there is it is likely to be the synchron motor on the valve these can be changed on most valve types.

Jimmy Gas, December 2006
No, its not a combi boiler, it just heats a tank in the attic?. But i cannot get hot water upstairs or down, as i say but the central heating is working fine?

derek, December 2006
does the flame on the boiler go out when you turn the hot water on and it comes back on again thus not letting your water warm up properly.
if this is the case then your domestic heat exchanger is clogged up and needs to be cleaned.

s davis, December 2006