When I was rewinding it, the tape part of the VHS broke, how would you secure it to the other reel. What would you use? This is very important.

Philip Swanson, January 2007

first get a sharp knife and slice the spine label where the 2 shell halves meet.(if necessary)
then turn the cassette over and remove the 6 screws with a philips screwdriver.
remove the empty spool and use a flat blade scewdriver to ease out the clip from one end.
get the loose clear leader tape of the other spool and put it into the clip gap on the empty spool. then clip in the retaining clip, get one side in first and you may have to press down on ithe protruding side with the screwdriver so it snaps back into position.

romko

romko, January 2007