my boiler will not reset, when i try it goes through the motions and the the safety themostat neon lights up. the bar pressure is set at 1.5 should this be set at between .5 and 1. bar

steve, March 2007

can you check if you have continuity across the safety thermostat. if yes change pcb. when cool if you have more than 1.5ohm change the stat.
if all checks ok locate the flue stat, its at the top by the fan in the middle is a reset push it if its don't reset its faulty / or you have a problem with the flue itself.

hi-spec plumbing, March 2007

1.5 bar is normal

hi-spec plumbing, March 2007