I am trying to get door front off my diplomat dishwasher i have lost my instruction manual there seems to be what looks like a screw head at each side with a little spring inside but not sure whether to turn or press in I have tried to but no success any help would be great.

athole orrock, April 2007

Open the door. Looking at the fully open door (parallel to the floor), down each side are some Phillip headed screws. Starting nearest the dishwasher, undo the second screw on each side. Careful when removing the screws that the door does not drop down. With the screws removed carefully part close the door. You should now be able to lift the door off the spigots

Pete hepburn, September 2014

The slotted holes on the side near the top, have a special key,
They need pulling out not pushed in.
A bent piece of wire would do the job

Rest, April 2007

Just had a similar problem with my daughter's item, except that the front fell off, and how to fit it back again!
I assume you want to remove the front panel.
Near the bottom of the door, on the inside, at each side, there should be a screw going through the door and into the false front. The front may then come off with a little jiggling and depressing the plungers at the side which you have already noted.

DWH, April 2007