The timer knob on my indesit washer-dryer keeps clicking round?
The timer knob on my Indesit washer-dryer WD10 keeps clicking round and will not set the correct programme, it fills and pumps out at the same time as the dial clicks round
I have the W93. It confused me as to what was going on. We were going to get another 2nd hand mch until l found these cures. They worked. Thanks so much folks!
Daniel, June 2014
sounds like a faulty pcb/ eprom
Ted, June 2013
help i have tried all of this turning it on and off but still it clicks round please someone help i cant afford expensive repairs
driving me mad, November 2012
The programme selector
knob keeps turning? I've tried to turn it to a dot, turned it on, and it was still, but when i turned i to a program again it started turning again. The model i W83. Please help me with this
Ivy, May 2010
the timer knob on my indesit wa 105 uk washer keeps clincking round on it own help
jj, April 2010
i keep trying to re-set it but it isnt working,, starts a wash then stops and starts clicking again,, previously i have managed to re-set it, help!! i cant afford a new one!
ann, September 2008
Got exactly the same problem.and just done as John Fox said and now it works a treat......So a big THANK YOU TO JOHN FOX...
Terry Smith, June 2008
Followed Adams advice on my Indesit wa105 and its working perfectly again !!!
I have no doubt that if I called someone out they would have told me a few porkies and charged me silly money for a simple fix.
Excellent
Will have to let my freinds know about this site.
Jerome, March 2006
anybody know what each of the errors are and how many flashes
john fox, October 2004
I have just had a similar problem with my Indesit W161 washing machine; the program selector just kept 'clicking' around. After following Adam's advice - turn the machine off, turn the program selector to a red dot and then turn it back on again - it seems to be working as normal. I'm glad the solution wasn't expensive ;-)
Thanks Adam.
Stuart, September 2004
It means the memory has got itself confused. Reset the machine by turning the machine off and then turn the program selector to off (one of the 4 black dots), turn it back on and the LED should blink fast for a moment. Turn it off, select the program you want and then turn it back on. The reason mine was confused was one of the connectors to the pump was loose. I got quoted £90 for a timer in a shop but found this out and it's working fine.
Adam, June 2004
When the dial is clicking round the small red light on the facia panel will also be pulsing. Count the number of continuous pulses, this number of pulses lets you know the fault with your machine.
E Lambert., June 2004
yep me too, went in shop and was told i needed new timer-minimum 70-80 quid he said better off getting new machine. I thanked him for his honesty, as he doesnt even sell machines only parts!!
Matt, June 2004
Got exactly the same problem. Did you resolve it in the end?
