i am changing a profile 50 for a suprima 50 the maual say to wire back to the pump from the boiler i presume this is for the over run
do i remove existing wiring from pump to terminal or just add the 3 core to the pump along with existing wiring
kevin

kevin, March 2005

yep but you have to also wire back to the pump

its says the pump wiring should be routed throughthe hole in the base of rear coverthrough the cable clamp and connected to the terminal connection?
so do i remove existing wiring from pump to terminal or just add the 3 core to the pump along with existing wiring

kevin, March 2005

PROFILE 50 HAS SAME WIRING CONFIGERATION AS SUPRIMA 50

STEVE BH HEATING, March 2005