hotpoint WF 630 aquarious 1300

when switched on it will only run a test cycle and it will not run a wash cycle, no water will come in on the test cycle either

wayne currie, March 2005

Hi, i did have this problem and almost gave up on it, but i read a forum like this and it gave me the answer the knack is to press and hold the "on" and "start" button together.Firstly i turned the machine on and it showed test i then cancelled the test by holding the start button in.that cancelled the test then i pressed both buttons together and it displayed "dfinish" to my suprise i had cured it if it does not work keep trying i did. but you might have to try a differant sequence but it the cure is in the two buttons pressed together....tom

Tuckamouse, March 2008

There is a small filters where your water hoses fit onto rear of machine, try removing them could be retsricting water flow.

Scott, March 2005