tetra elec fault?

can anyone tell me where to get spare partrs for a tetra roadmaster booster as I need a circuit board to operate lights as lights and indicaters not working the serial no is 948110301

done

how do i mend split outer hose on bosch ptl1 wallpaper stripper?

bosch ptl1 outer hose split close to connector to tank

done

'Slipped' yale lock?

I have a yale lock on my door from the previous tennants and the block with the handle (internal side of the door) has slipped down, and the mechanism no longer lines up with the space on the door fra ... more

done

karcher puzzi 100?

just replaced pump ,circuit board and switches for vacuum and pump. machine keeps tripping im concerned that the wires are on correctly. switches show 1 1a / 2 2a obviously have blue and brown feed ... more

faulty yale lock?

the yale lock on my front door wont let you close the door or open it, can put the front door key in but it wont turn, cant even put the door on the latch and close it that way the latch will not move ... more

When I step on WW scale it shows Err and does not go to 0.What I have to do?

When I step on WW scale it shows Err and does not go to 0. What I have to do to take my weight?

done

When turning on pto engine die on 120 John deere?

When I engage the pto to start the blades on my L120 John Deere lawnmower. The engine quits.

switch?

ive taken apart the on/off switch on my karcher k5-20m and cant put it back together

Karcher 4.99 Power Washer?

Karcher 4.99.....I changed the cylinder head (relatively easy job) but when I tried to operate NO water comes out of the machine. The hose is clear and unfurled into the machine and I let it run (NOT ... more

done

water filter karcher kb2020?

I have recently stripped down my kb2020 to identify an on/off problem. But blow me i cannot work out where the tube containing the water filter at the end goes.

done

fixing a silverline 4 inch vice?

i own a 4 inch vice by silverline.i have broken the screw underneath.it requires acme thread lead screw but iam unsure of it's size,if anybody could help that would be brilliant ta.

done

town county 128 not working?

Yes i need a manaul for a town county 128 can any one help thank you

done

How can i replace my rotary nozzle to Bosch Pressure washer?

I have a Bosch Pressure-washer and the rotary nozzle does not rotate. It is an AQUATAK 115 Plus. Where can I buy a replacement nozzle and how do I remove the old one from the lance and replace it with ... more

how to fix the blade lock on extreme 800 jig,saw?

the locking system on my extreme 800 jig saw has broken.The twist lock seems to have broken off exposing what looks like a spring and a loose cerclip. the jig saw itself has had very little use.the b ... more

How do I fix my Karcher Pressure Washer 411a?

Washer did not switch off when lance not in use, suspect the spill valve/ pressure switch. Will removing & cleaning solve the problem?Burst delivery hoses are expensive!

not running after starting?

generator does not run when choke is pulled back after starting

How to fix my karcher k2. 94?

My pressure washer has no power at all and when I turn the power switch on it blows the house electric. The machine makes no noise at all can anyone help

done

how to repair a water butt?

how to repair a wet leak

done

my Kartch will not work when watter is turned on?

The switch turns on the power and switch's 0ff , but when the water is switched on the power cuts out

done

How do I repair bellowing floor boards?

The property is old, and part of the floor is lower, it is bellowing. Someone suggested leveling it with hardboard - can you advise/any tried and tested suggestions ?

done