Do you sell brushes for circular saws?

I need a brush for a 'Champion Circular Saw' Model number is: CCS 1010.

done

How do I remove a blade from an old saw?

how do I remove the blade from a craftsman circular saw model # 315.109030

done

where can i buy bearings and brushes for a skil saw 534?

where can i buy bearings and brushes for a skil saw 534?

done

7" CRAFTSMAN CIRCULAR SAW WILL RUN?

I BELIEVE IT'S THE BUSHING'S BUT CRAFTSMAN DOES NOT STOCK THESE PARTS. ANY OTHER SOURCE?

done

can't start my homelite 240 chain saw?

hello, have not used the saw in sometime, i put in a new spark plug and cleaned it up, however it will not start, would appreiciate any help on this.

done

how can I fix my t.v screen?

My 52" Sony widescreen t.v is developing black lines along the corners of the screen. How can I remove the lines or fix the screen?

done

My 1 year old SkilSaw circular saw will not start?

I have a Skilsaw 7 1/2 circular saw. It's only a year old and not used that much. It will not start, anybody out there have any ideas to trouble shoot this problem. Thanks

done

how do I check oil level in my Skilsaw?

how do I check the oil level in my Skilsaw 7 1/4" worm drive and what type of oil do I use

done

Skilsaw Model 534 6.5" 9 A 115V - Blade bolt LH or RH threadS?

Unable loosen blade bolt. One Skil shop said bolt has Left-hand threads, but another said Right-hand threads. Can anyone check their Manual, or Saw, & advise? This saw is 35-40 years old, the heavy s ... more

done

How to start my bosch 1677 worm drive saw?

I am hoping somebody can help me out here. I bought a refurbished Bosch 1677 Worm Drive saw from CPOBosch and the Big Foot 10" Saw Adaptor. The adaption went well, however, halfway through my first cu ... more

done

any info on sears 7" electric hand saw model 315.27802?

Does anyone know anything about a craftsman 7" electric hand saw model 315.27802? (actually it's a old circular saw)

done

How do I get my heavy duty Milwaukee Circular saw to start again?+?

It just stopped while I was using it to cut some boards. I can't get it to start up again. It is a Milwaukee heavy duty circular saw 6390.

done

How can I repair my Craftsman circular saw model #315.27802?

How can I repair my Craftsman circular saw model #315.27802. It is getting really intermittent in starting when I pull the trigger switch. I havbe looked up the switch availablity on the Sears webs ... more

done

gOODMANS W282NS?

Left on stand by all night. No power this morning. Checked mains fuse no problems. Took back of found another fuse "t2ah" could this be the problem if so how do i purchse and where from or could it be ... more

done

I have a Stayer SC271 and have a wood burning smell?

When using my saw I get bad a wood burning smell. I have only used the saw say 12 times since purchase. Could it be the blade or something else. Any help would be appreciated. Thank you

done

i need brushes?

i have a handi circular saw and i need to know where to get replacement brushes

done

How can I fix my dewalt 7 1/4 circular saw?

My saw spins but when it comes in contact with what is being cut, it catches and stops. The bolt in the middle which holds the blade in place still spins at the speed the blade should be spinning at. ... more

done

how do I remove frozen blade bolt?

I have an old Porter Cable circular saw and the blade bolt is frozen and won't come off....and the saw has no place to "lock" the motor shaft so I can break loose the blade bolt. How can I remove the ... more

done

How can I fix my Goodmans W282NS-T TV?

My Goodmans W282NS-T widescreen tv has suddenly stopped working. When you turn it on you can hear the High voltage on the tube for a second or two but then just shuts down into standby mode. Does anyo ... more

done

my circular saw needs new brushes and/or bearings?

the manuals say to check these parts and replace them if necessary, but they do not give instructions how to do this how is this done? i have a 6.5 in skil saw model 534 It is an older model can I ... more

done