Where can I get batteries?

hi looking for some batteries for a extreme circular saw

Drive belt for CLM1500TSS table saw?

bought about 10yrs ago. served me well as a DIYer. belt just went. blade jammed, and in the seconds it took to kill it the blade had perished in one spot and is now on the bench. I live in Ireland an ... more

done

Anybody breaking a FMTC210MS mitre saw?

I need the helical slave gear that is driven by the motor. All of the teeth have sheared off! I can't find a spare anywhere online, so if anybody knows where to buy one, please post back here.

done

Elu tgs 172?

Saw was running and cutting normally at full speed. Finished cutting last piece still running at full speed then it slowed and stopped, saw moter still has power, it is humming, but will not run up. ... more

done

replacement bolt for McKellar mitre saw?

Where can I buy a M8 fine thread left hand bolt for mitre saw

is my charger working correctly?

i have a performance pro circular saw clm18vg2cgr when i insert battery, charge plus light on and fully charge light on, but not fast charging light!

belle 150 electric mixer ?

motor stops running after about 10 minuits leave it cool down 20 minuits start ok how do i rectify this problem please

iwont drive belt for pp2505bd and were to get one plz?

i wont drive belt for piller drill pp2505bd and were to get one plz

When switching on the motor starts but slows done and stops?

Motor will not continue running when you take your finger of the switch what is the problem and how do I fix it?

b&q pro mitre saw clm210lsms?

When I changed the blade I removed the rotating guard. I also removed the centre screw of the guard holding the spring mechanism. How do I put this back together? Thank you.

saw rotation?

When my craftsman 7 1/4 inch circular saw is turned off, the blade is free to spin.

done

PerformancePro 701W rotary cutter flexi drive?

Where can I purchase a compatible flexi drive 925 x 3mm for this piece of equipment which has hardly been used. Research has shown that this company doesn't supply parts for its products so if anyone ... more

Where can I get we brushes for my power base saw?

Require carbon brushes for my power base saw. Model number 801745 Motor 1200 Voltage 220/240V 50Hz Serial Number 0058 112

Inventek spiral saw instructions ?

Could I have a copy of the instructions please if not too much trouble

rexon chop saw blows fuses?

hi my rexon DM 2500AL started sparking at the brushes excessively now it trips the house RCD when attempt to start any suggestions would be welcome mike

done

My PWR1750CSA electric chain saw has stopped working?

The chain saw was working perfectly well until it got stuck whilst sawing a branch. The cogs rotate but the spindle doesn't move

fixing a loose handle on a circular saw?

the handle on my circular saw is loose, I disassembled the handle and saw two screws holding the handle on one tightened nicely, the other one would not tighten, it was like there was nothing there

Challenge 1200W MCS 5025 ?

Need help to reassemble

macallister lithium battery . MCULi-60?

Charger packed up for no apparent reason. Would appear charger is obsolete . Does anyone have one to sell or suggest as to what may be wrong with it?

done

inventec spiral saw manual?

hi does any one have a manual for an inventec spiral saw, that I could have a copy of please