Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Joan Sorrentino asked ... Barcalounger issue?    |    David asked ... Not starting until I bang door closed?    |    Click here to ask your question

home Fix label Security Systems

C&K 236 Keypad Ping Frequency?

How do I change the ping frequency to the central office to test daily instead of monthly as it is now? I do know my PIN. Thank you.
home Fix label Security Systems label_important Home Alarm Systems

Scantronics 4600?

I have a faulty 04604uk55 contacts board. Any ideas where I can source part or totally eliminate zone 4
home Fix label Security Systems label_important Home Alarm Systems category Scantronics

Home alarm keeps going off when it’s on thru the night ?

When the alarm is on it keeps going on an off waking up the neighbours
home Fix label Security Systems label_important Home Alarm Systems

Alarm sounding and showing tamper?

Alarm sounding and showing tamper. How can i solve this problem please?
home Fix label Security Systems label_important Home Alarm Systems

how to disable immobiliser?

how can i disable thatcham immobiliser on my 1996 xj6
home Fix label Security Systems label_important Car Alarm Systems category Jaguar

Alarm sounding and showing r1 h?

What could be wrong and how can I stop it.
home Fix label Security Systems label_important Home Alarm Systems

Can I purchase mag door entry logic 4?

Require door mag switch ? For Logic 4 intruder system wired
home Fix label Security Systems label_important Home Alarm Systems category Paradox

Optima XM house alarm?

Tapper light on unable to reset.Key pad dead What I have done :- Repaced The Battery Tried to reset it . ( Reboot )Power off /disconnect battery/ reconnect batt,box door shut / mains powe ... more
home Fix label Security Systems label_important Home Alarm Systems category Optima

Reset a newly installed replacement key pad? 9827 ?

please can you help!!! Just purchased an old key pad as a replacement. I don't have the old code so how can I re set it to work. it keeps going off and now flashing rt.
home Fix label Security Systems label_important Home Alarm Systemsdone

9448 panel connections Peronist delta ?

I have a scantonix 9448 panel and ther bell box has failed I’m trying to replace with a PYRONIX DELTA bel box connections from the old panel are T = YELLOW A = 0v BLK D = +bell RED B = Strob ... more
home Fix label Security Systems label_important Home Alarm Systems

How can I fix my Veritas 8 Alarm ?

periodically the key pad sticks and the alarm goes off or I cannot set it
home Fix label Security Systems label_important Home Alarm Systems category Veritasdone

How can I remove the scantronic keypad in order to plaster behind it?

Having my garage converted and need to remove my scantronic entry/exit key pad in order to plasterboard and plaster behind it then replace. Owing to current lockdown can’t get an engineer can anyone ... more
home Fix label Security Systems label_important Home Alarm Systems category Scantronicdone

My Scantonic 9247/9889 simply stopped arming when code was entered?

We can't set our Scantronic alarm. We found the battery dead and one of the three internal fuses blown. We replaced the battery and fuse but the problem persists. Although light can be seen behind the ... more
home Fix label Security Systems label_important Home Alarm Systems category Scantronicdone

Micromark mm 23092?

I have just purchased the above alarm system and find that the instructions vary from the produce. The leaflet shows a block connector with 4 terminals, my combined siren and strobe box contains many ... more
home Fix label Security Systems label_important Home Alarm Systems category Micromark

Veritas 8c ?

I have a faulty keypad I think as I can not use buttons 4567890. They do not beep and i now can not set or reset my code. Can anyone advise as to how to resolve?
home Fix label Security Systems label_important Home Alarm Systems category Veritas

how we can we reset without the code?

We have a c and k securitech alarm system ST800L+ which we have never used as we moved in 4 years ago and didn't have a code. For some reason it went off last night at 2.45 and we had to wait till it ... more
home Fix label Security Systems label_important Home Alarm Systems category Securitechdone

factory reset?

Hello, having trouble getting factory reset on veritas 8, done everything the manual said and it will not factory reset. any suggestion please.
home Fix label Security Systems label_important Home Alarm Systems category Veritasdone

I have a 9651 scantronic we had a 24 hour power cut how do I reset?

It comes up with battery dead
home Fix label Security Systems label_important Home Alarm Systems category Scantronic

optima xm6?

i used to have the optima bell box alarm outside but unfortunately hit is broken. i have replaced it with a pyronix deltabell plus bell box. could you tell me how the wiring fits Into the pyronix box
home Fix label Security Systems label_important Home Alarm Systems category Optima

fob?

Ducati van key will not work
home Fix label Security Systems label_important Car Alarm Systemsdone

Fix Fault - Security Systems

home label_important Car Alarm Systems label_important Home Alarm Systems

Fix Fault - Security Systems

home label_important Car Alarm Systems label_important Home Alarm Systems

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my Hisense 50A6BGTUK?
How can I fix my Fiat Palio?
How can I fix my Jeep Grand Wagoneer?
How can I fix my Honda CBR125R?
How can I fix my BT Freestyle 750?