Hello, at start up the BOIS runs and all stops, the screen shows all ok until the bottom line when reads,
A : Driver error
Press F1 to continue

you press F1 and the computer works. (running Vista on Zoostorm)
How do I check to see which driver has the error?
Thank you.

I had a reply saying, You need to change the BIOS settings. Set to boot from CD first, then C: and finally A:
That should sort it.

BUT!!
I went into the Bios set up, it shows,
1st boot device CD/DVD: 3M-DVD DC D
2nd boot device HDD: PM-WDC WD1600A

so I have left these settings but still same problem.
Can anybody help? thank you.

Simon Warcup

Simon Warcup, February 2008

To resolve this issue first Enter in BIOS by pressing Del or F2 key. Then change Boot device priority.
Keep first boot device CD or Dvd, second HDD then third Floppy drive. If you don't have Floppy drive then Disable floppy drive from BIOS. This will solve your problem

Sandy, March 2009

Hello Simon.

Inside the computer, disconnect A drive (take the ribbon off the mobo), set the front page in BIOS to disable A & B floppy`s and change the boot order to C drive only. If that still doesn`t boot, you`ve got a problem with the system files on the hard drive.

Regards
Sue

Sue Fox, February 2008

Change the order of boot up then

Roger, February 2008