John asked ... Scantronix 9450 box stuck shut?    |    Pekaye asked ... Clutch Cable change?    |    Richard asked ... Mountfield SP414 mower, revs too high?    |    Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Click here to ask your question

How can I fix my Fisher Paykel GWL?

My washer would not come initially.After several attempts it came on.I walked away only to find later it had shut off.I now find it will power on but shuts off after 1 min.Must wait 2.5 min before it will power on again.Tried adjusting the load,;no good.
johnny g, January 2010
When power shuts off try touching the drain pump underneath on front right corner to see if it is very hot. If it over heats it will shut power off until it cools down. If pump is ok then it either has a bad wiring connection some where or maybe a faulty motor controller (main pcb).

Lincoln Appliance NZ, January 2010
link Click here to see other fixes for Fisher Paykel GWL.