Hi all.

I have a Simpson Encore 555 washing machine. It gets through the wash cycle normally until it attempts to spin and then one light on the panel flashes and it beeps continuously.

Agitate works fine, the water level fills to the correct level. The pump is pumping out all the water. The spin mechanism on the bottom of the drum appears to work fine as it uses this to slowly turn the drum while filling.

Does anyone have any ideas on what to look at next? Since the washer appears to be mechanically fine, the pump works fine and the water level sensor seems to work fine I'm not sure what's left?

Thanks,
BruceW

BruceW, January 2007

My Washing machine Beeps three times every few minutes after it finisihes we put it on when we go to work and as it is outside the noise really bothers the neighbours can we do something to stop the beeping? It is a Simpson Ezi Set 750 Thanks alot

Mark, April 2007

Update: The small round moulding on the side of the main drum which connects to the pressure sensor appears to have not been emptying of water properly.

I removed the hose joining this device to the pressure sensor and tilted the washer to empty all water from this moulding. After re-connecting the washer now works.

BruceW, January 2007