I have a Servis Easilogic front loader washing machine. The drive belt wont stay on. I can't see anything obvious to adjust tension for example, the belt looks in good condition, and the drum turns by hand. The drive arm of the motor looks as if it is at a slight angle - this could be my eyes, or could it have got bent?

The washer is only about 5 years old and doesn't get much use

thanks

Roger, May 2007

see if the rear bolt has come out at the back of the motor
Anymore questions or parts required http://www.freewebs.com/msdapudsey1
Just go to the forum

phil grimshaw, May 2007

This will help you find out if you bearings are worn

CUT AND PASTE THE LINK IN TO THE ADDRESS BAR

http://www.youtube.com/watch?v=kG5HWQ0x2s0

These videos are for information purposes only. A qualified and proficient engineer should be employed to replace any faulty parts on your domestic appliance.

Visit our shops for all your parts

http://www.Apart4u.com

Or you can visit our eBay shop for bargains

http://stores.ebay.co.uk/Apart4u-Domestic-Appliance-Spares

apart4u, May 2007