where do i get a rubber door seal for a hoover six condenser dryer?

I need to replace the rubber door seal on my hoover six condenser dryer - TC 650 but cannot find out where to get a new seal

done

How can I fix my dryer?[Moffat - GE Older Style]?

I have two things wrong. I do not have heat and my dryer will not stay on. If I hold the start switch the dryer will run. I will not get any heat but as soon as I release the switch, the dryer will ... more

done

White Knight - Heating Element Gone?

I have a White Knight CL421 Tumble Dryer - its stopped heating up I have stripped it down, the thermostats are all closed circuit (I assume thats fine) BUT, the heating elements are both Open-Ci ... more

done

Zanussi condenser tumble dryer leaking?

Everytime i run the tumble dryer there is a small amount of water I can see underneath it. Needless to say this is ruining my wood floors. What can be causing this or is it inherent in condensing drye ... more

done

tumble dryer doesent spin!?

HELP my white knight dryer model WK 447 wont spin unless u give the drum a push then it spins but when it change direction the same thing happens again! PS the belt dosent slip

done

Zanussi TD163 Tumble Drier Spin but not heat?

The drum spins but not heat i have changed the heater element but still the same i see a themo switch on the outlet i think this is ok is there any other one to check What is the best way to check ... more

done

How can I get my White Knight tumble drier to heat?

My White Knight tumble drier has had the manual reset TOC replaced but still cuts out.

done

Replacing a belt in a tumble dryer?

Does it differ between models and companies when a belt in a tumble dryer?

done

how can i fix my whirpool awz541?

moisture is not getting from the drum to the pump resivior

done

How can I replace the motor in A Creda condenser t620cw?

The heating comes on but the drum does not rotate. If I manually rotate the drum the fan rotates, if I manually rotate the fan the drum rotates so I think the belt is ok. Can't see how to get to the m ... more

done

Why would TC470 belt shred?

I replaced the fan, the belt twice and the jockey wheel. I've checked the bearing which doesn't look oval. But still the belt ends up shredded. I have belt tension, and the machine does basically work ... more

done

Hoover tv630 won't heat up?

The Hoover TV630 is 3 years old and has the filter light on all the time. The drum turns but it does not heatup. I can not see where the filter clean detect is etc. and I think this is why the heater ... more

done

replace the drum bearings on my Creda 37747 condensair?

Can you please help our Tumble drier is making a dreadfull noise which I believe to be the drum bearings which I would like to replace myself

done

How do you fit the drive belt on a hotpoint TDL 30 tumble drier?

There doesnt seem to be any way of tensioning the belt. Is there a knack to it?

done

How do i fix my whirlpool model awz221?

The dryer is turning, but there is no heat. I am assuming that it's the heating element. How do I fix it?

done

Replaceing the belt on a Zanussi TC 470?

The large drive belt snapped on my Zanussi TC 470, I have tried to replace it but the new one is much to slack. Dose anyone know if there should be some sort of tensioner that needs to be fitted. It j ... more

done

my G.e. dvl223 dryer first wouldn't tumble and now won't turn on?

It is brand new

done

Dryer not working, hotpoint washer dryer 1100 model wd51?

Was working fine last night, now the dryer will not dry clothes any suggestions please. The machine doesn't even get warm

done

How can I fix the 'On' button on my Hotpoint TV630 Dryer?

When I press the 'On' button the dryer starts up but as soon as I release it, it switches off. I have to keep pressing the button until eventually it stays on. Is there any way of fixing this irritati ... more

done

How to fix Creda condenser t620cw?

I've tried the t.o.c s, the relay, heater. I'm not getting a live to the heater, I have a nuetral but no live. I'm thinking it must be the programmer, has anyone had this fault.

done