Zanussi zwd1471w washer / dryer. Just replaced main pcb which had a burnt track, and now with new one in place when machine is turned on there's a short pause followed by the door catch clicking 3 times then another short pause and the door catch then clicks continuously. Only light coming on is the on/off. Doesn't respond to any button pushes. Any ideas?

Andy, March 2009

stop using it and replace the door lock as this might of been the reason the main pcb had failed before.hopefully it hasn't damaged the new board????.boards don't blow unless a faulty part has been attached to it as a rule.remove door lock and look to see if there is a brown mark on the plastic casing.this can be a tell tale sign of a faulty door interlock.

ck, March 2009