Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

What do the letters SE flashing in display window mean?

After a power cut I noticed the display window on my greenstar 30CDi Worcester boiler alternating between normal display of temperature and the letters SE the boiler is operating normally other than this, what do these letters mean?
Arthur, April 2009
if boiler has been serviced within 12 months, you can clear it yourself (it's just a timer). If it has not been serviced in last 12 months, arrange for it to be done as it's especially important for condensing boilers.

To clear SE:

Press spanner button for about 10sec unitl it glows orange
You will see 1.A in display
Press Eco repeatedly until display shows 5A
Press Chimney Sweep button (man with ladder) once.
Button will glow and 00 appears on display
Press Eco once
Press and hold Chimney Sweep until [] appears on display, then let go
Press spanner once, it will stop glowing and the display will go back to normal (shows flow temp) and SE will be gone.

Bunslinger, April 2009
Its telling you that the boiler has run for a certain length of time, and that it is about due for a service. Its not showing a fault.

John, April 2009
link Click here to see other fixes for Worcester Greenstar.