GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Fix Fault Jcb

labellabel_off

check_circle Free repair help

We have 290 questions about fixing 'jcb' in category Vehicles, Tractors

How can I fix my 1986 JCB 3CX 4WD sitemaster- gearbox problem?

Gearbox loosing transmission fluid from drain hole at bottom of bell housing (pouring out). I am assuming a seal has let by in the gearbox. What is involved in its repair?
home Fix label Vehicles label_important Tractors category JCBdone

jcb 525-58 hydraulic hose repair?

PLEASE TELL ME HOW CAN I REPLACE SAFELY THE HYDRAULIC HOSE INSIDE THE MOVING PARTS OF THE TELESCOPIC
home Fix label Vehicles label_important Tractors category JCB

Manually cranking over a JCB 3c?

When home I tried towing it whilst in 1st gear, just to see what sort of noise came from the engine and thus point me at the head or sump for my first attentions. All that happened is that the forwa ... more
home Fix label Vehicles label_important Tractors category JCBdone

slow hydraulics?

ive just bought a jcb 812 the problem is it is very slow in slewing and when you start tracking and working bucket at same time it stops tracking so you can only do one thing at a time it seems worse ... more
home Fix label Vehicles label_important Tractors category JCB

5.what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thankyou for your time,knowlege and help,Mr.Toad. Very much appreciated. Yes, i agree,its looking gearboxish, unfortunatly!. Thankyou too for the contact. I'll him out. Thanks again, Bruce.
home Fix label Vehicles label_important Tractors category JCBdone

4. what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thanks, MrToad. The shiny plunger is returning fully into the bushing[threaded with nut],with no shiny left exposed and the L shaped[sprung] lever is returning fully to its stop. I tapped the plunger ... more
home Fix label Vehicles label_important Tractors category JCBdone

3. what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thankyou for your help,Mr.Toad. When clutch pedal is released the 'rod' returns back into the threaded 'shaft' fully.There is large tab style nut on that 'shaft' with no tabs flattened.This retains t ... more
home Fix label Vehicles label_important Tractors category JCBdone

JCB hydraulics ?

Thank you again Mr Toad It occurs to me (not yet having taught myself the workings of a JCB) that perhaps the hydraulic pump for the rams may be driven from the gearbox. If that is the case, I am won ... more
home Fix label Vehicles label_important Tractors category Challengedone

what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

No forward/reverse drive.Tor/conv fluid at correct level now,however it was much too high previously, Mr Toad. Gear stick moves easily into gear slots when forward/reverse is selected with clutch peda ... more
home Fix label Vehicles label_important Tractors category JCBdone

what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

I`m not getting any forward/reverse drive when operating forward/reverse lever in all gears[4].This problem occured quite suddenly after some 'clucth slip' in 3rd and 4th gear.
home Fix label Vehicles label_important Tractors category JCBdone

Moving the JCB?

Thank you Guys both for your suggestions. Nelson, good input but sadly I don't have a suitable dump truck! Mr Toad, excellent advice.! (& I can cope with all of that). But please can you tell me if ... more
home Fix label Vehicles label_important Tractors category JCBdone

Moving a JCB that does not run?

I recently brought an old JCB 3C Mk 111 from a local farmer. It had been stood for a few months since “the engine blew” when he was digging a drain. My problem is that it is in his yard, about 2 t ... more
home Fix label Vehicles label_important Tractors category JCBdone

Locating hydraulic problem on jcb 3cx 86 approx?

Front bucket creeps down on the crowd, there are no oil leaks, any imput would be much appreciated
home Fix label Vehicles label_important Tractors category JCBdone

JCB 3c2?

Does a jcb 3c2 have a glow plug and if so where is it?
home Fix label Vehicles label_important Tractors category JCBdone

How do you re wire a 1972 JCB Mark II?

How do you re wire a 1972 JCB Mark II. At the moment there is no wires on the machine at all. I am re storing the machine and want to get it back to its orignal state. Does anyone know what electri ... more
home Fix label Vehicles label_important Tractors category JCBdone

how to fix fwd/rev onJCB 214?

the shuttle shift on my JCB 214 backhoe works some of the time,what puts the machine into gear and how would I fix it. Thanks for any help
home Fix label Vehicles label_important Tractors category JCB

JCB 3cx Contractor Transmission?

I need to find the oil pressure switch on the JCB 3cx Contractor. Transmission number 442-00330/4/247.
home Fix label Vehicles label_important Tractors category JCBdone

wiring diagram JCB 801 mark 1?

does anyone know where I can obtain the above wiring diagram ? any help would be appreciated. regards Woody
home Fix label Vehicles label_important Tractors category JCBdone

JCB 3CX?

I am trying to get the rev clock working on my 3cx Is it wired from the altenator?
home Fix label Vehicles label_important Tractors category JCBdone

LCB 3c Mk11 Cab?

Does anybody have a cab or know where to get one for a JCB 3C Mk11
home Fix label Vehicles label_important Tractors category JCBdone

Fix Fault - Vehicles, Tractors

home label Vehicles label_important Tractors

Fix Fault - Vehicles, Tractors

home label Vehicles label_important Tractors

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my JCB 526?
How can I fix my JCB 2CX?
How can I fix my JCB 1CX?
How can I fix my Ford 8340?
How can I fix my JCB 3CX?