Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

home Fix label D.I.Y label_important Switches and Sockets

i am changing my shower pull cord switch on the old switch it as N1 N2 and ?

L1 L2 on my new switch it has two supplys and two loads, is L1 and N1 the supply on my old one and is L2 and N2 the loads or is it the other way round
home Fix label D.I.Y label_important Switches and Socketsdone

plug stuck in outlet?

appliance plug stuck in outlet
home Fix label D.I.Y label_important Switches and Socketsdone

consumer unit?

Yes I know its not a switch or a socket but the only elecs catagory: I have seen Wylex plug in MCB fuses to replace the wired type fuses in my Wylex consumer unit I know they will stick out a bit bu ... more
home Fix label D.I.Y label_important Switches and Socketsdone

need code for a BUSH television?

need code for a BUSH television
home Fix label D.I.Y label_important Switches and Sockets category Bushdone

Do I need to call sparky?

I am a 23 year old woman, I live by myself but am not afraid of DIY. The other night I went to turn my outside light on an it flipped the circuit, I went to flip the circuit breaker back on but it won ... more
home Fix label D.I.Y label_important Switches and Socketsdone

my immersion trips when the immersion is turned on?

I've just installed a new switch to my immersion but when i bell out the cable it shows live and earth to be making contact. Everything is wired perfect, could there be something wrong with the instal ... more
home Fix label D.I.Y label_important Switches and Socketsdone

my immersion trips when the immersion is turned on?

I've just installed a new switch to my immersion but when i bell out the cable it shows live and earth to making contact. verything is wired perfect, could there something wrong with the installation ... more
home Fix label D.I.Y label_important Switches and Sockets

How do I repair a tap switch for a lamp?

I have a tap switch that controls the lights on our bed's headboard. It turns the lights on and off as well as three levels of intensity. When I touch the tap bar, it longer operates the lights. Ho ... more
home Fix label D.I.Y label_important Switches and Socketsdone

Why is my fuse box tripping?

I have put a new light in my garage but every time I turn it on it trips the trip switch? It is wired in to the 5 amp MCB that the other garage light is in. If I wire it into one of the 15 amp MCB's ... more
home Fix label D.I.Y label_important Switches and Socketsdone

How to wire a CA10 A201 2 pole switch?

There are 4 connection behind. Anyone know how to connect to activate it?
home Fix label D.I.Y label_important Switches and Socketsdone

Timer switch ET7-MP?

What's the difference between ON and AUTO? Auto turned it off after half an hour!
home Fix label D.I.Y label_important Switches and Sockets

How to wire a double light switch for two independent lights?

I have added a second light to my garage ceiling and want to change the single light switch for a double so that I can switch both lights on and off independently. At present there is one live feed ... more
home Fix label D.I.Y label_important Switches and Socketsdone

outside lights?

how do i get power to my outside light from the house
home Fix label D.I.Y label_important Switches and Socketsdone

How important is the earth wire/terminal?

When attempting to connect anything to the electrical supply how important is the earth wire? I have seen in some appliances ie table lamps that there is not an earth wire so what job does the earth ... more
home Fix label D.I.Y label_important Switches and Socketsdone

how can i replace a shower pull cord switch ?

i was thinkin about replacing a shower pull cord cor the old one does not switch the shower on i have a replacement but its got supply and load can you tell which wire goes where
home Fix label D.I.Y label_important Switches and Socketsdone

Manuals?

Can anyone please help me aquire the User Manual for a Thomson ROC 404 remote control ?
home Fix label D.I.Y label_important Switches and Sockets category Thomson

instructions for Uni-Com timer switches?

230v-50Hz 13A 3000wMax BS1363 this is all the information that is on the plug they are digital timer switches
home Fix label D.I.Y label_important Switches and Socketsdone

bathroom switch cord pull?

my bathroom switch is faulty and i am going to replace it with a new one. Im not sure where the wires go in the new switch as i have 1 red wire 1 brown wire and 1 black wire, on the switch its 1 hole ... more
home Fix label D.I.Y label_important Switches and Socketsdone

blown wire near to switch?

ive drilled thru the wall and taken out a wire which leads down to the light switch need recommendations as what to do, replace the whole cable.would splicing it be sufficient, do i need to get an e ... more
home Fix label D.I.Y label_important Switches and Socketsdone

kht234hdid anyone find an english supply?

is a kht234h dimmer switch available in the uk
home Fix label D.I.Y label_important Switches and Socketsdone

Fix Fault - D.I.Y

home label D.I.Y label_important Switches and Sockets

Fix Fault - D.I.Y

home label D.I.Y label_important Switches and Sockets

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my Homelite UT15136?
How can I fix my New World Plan 7?
How can I fix my Kenwood FP310?
How can I fix my Baumatic BT2750?
How can I fix my Vokera Compact 35 HE?