1 hour ago Stuart G asked ... C3 Front Wiper control problem?    |    4 hours ago Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    Click here to ask your question

home Fix label Garden Tools label_important Chainsaws

What's wrong with my saw?

I have a Stihl ms390 recently it has started acting up. While cuting it seems to lose power like maybe it has taken to big of a bite and bogs down sometimes dying I have cleaned airfilter mixed new ga ... more
home Fix label Garden Tools label_important Chainsawsdone

XL 12 Fuel line ?

My XL12 fuel line started leaking where it comes out of the top of the fuel tank. It seems to be just 1/8" tygon/plastic tubing. I can see where it attaches to the carb, but am not sure how it attac ... more
home Fix label Garden Tools label_important Chainsawsdone

023 chainsaw?

my 023 stihl chainsaw runs for 5 sec then stops
home Fix label Garden Tools label_important Chainsawsdone

chainsaw crank bending?

Hi i have a jcb pcs38 chiansaw which was seized from been not used for a long time after the chine snapped it now runs but will not rev up and when hot the flywheel and clutch start to wobble like th ... more
home Fix label Garden Tools label_important Chainsaws category JCBdone

Husqvarna 041 bar not oiling when cutting?

I replaced the bar and chain with a new one.When I remove the bar and clean it,it oils fine.When I replace the bar and start to cut into wood,it seems to clog up again.No oil comes out.There is someth ... more
home Fix label Garden Tools label_important Chainsaws category Husqvarnadone

how do i adjust my carb settings?

how do i adjust my high and low settings on my mac 335 chainsaw it keeps cutting out when the throttle is applied
home Fix label Garden Tools label_important Chainsawsdone

Need specs for McCulloch 3214 chainsaw?

I am searching for specs for a 3200 series McCulloch chain saw. Need displacement (c.c.), power output (kW or hp), Power head weight. Thanks
home Fix label Garden Tools label_important Chainsaws category McCullochdone

carb settings for Stihl MS 250 chainsaw?

Carburator settings for Stihl MS 250 chainsaw
home Fix label Garden Tools label_important Chainsawsdone

STIHL 024AV?

OILER NOT WORKING IS THERE ANYTHING I CAN DO MYSELF OR IS IT SOMETHING FOR AN EXPERT
home Fix label Garden Tools label_important Chainsawsdone

Chain becomes loose Stihl 034?

Have a stihl 034 chainsaw and the chain becomes loose after a short while, thought it might be the Chain Tensioner so have replaced that, but still loosens after a few mins. Neil
home Fix label Garden Tools label_important Chainsawsdone

Where can i get a chain and bar for my Gardenline GPCS-42cc chain saw?

I want to purchase a bar + chain for the Garednline chainsaw GPCS-42cc. The bar is an Oregon double guard 91. 18"
home Fix label Garden Tools label_important Chainsaws category Gardenlinedone

how can i fix my eager beaver by mcculloch?

i need the adjustments on the hi and low its 2.0
home Fix label Garden Tools label_important Chainsaws category McCulloch

same problem?

where to buy? or order?
home Fix label Garden Tools label_important Chainsaws

Proper gas/oil mixture for Homelite XL-12? ?

I recently inherited a nice old homelite XL-12. It was out of fuel so I put in fresh fuel mixture, 40:1, and a new plug and it fired right up. On the gas cap it says, 1/2 pint oil to 1 gallon of gas. ... more
home Fix label Garden Tools label_important Chainsaws category Homelitedone

Stihl chainsaw won"t start?

I have a stihl 028 chainsaw that will not start unless I pour a little gas in sparkplug hole then it only runs until the gas runs out of the plug hole what might be my problem?
home Fix label Garden Tools label_important Chainsawsdone

Craftsman chain saw - chain came off and unable to get back on?

Just bought a Craftsman 2.4 cu in 40 cc 2-cycle gasoline chain saw with an 18 in bar. After using for 15 minutes, the chain came off and we are unable to get it back on. We are unable to adjust the ... more
home Fix label Garden Tools label_important Chainsaws category Craftsmandone

generator?

where can i get a capacator for a homelite textron 4400 watt generator?
home Fix label Garden Tools label_important Chainsaws category Homelitedone

what position does the spring in the starter motor go?

there are two plastic clips to secure it what way does it go on a (steel ) chainsaw
home Fix label Garden Tools label_important Chainsaws

where can i buy a bottom blade guide for a power devil bandsaw moel PDW5011?

where can i buy a bottom blade guide for a power devil bandsaw model PDW5011?
home Fix label Garden Tools label_important Chainsaws category Power Devildone

Gotta fix my husqvarna 365??

My husqvarna 365 chainsaw has a problem. It starts up great, good compression, but after 10 minutes of hard cutting, it starts making a loud popping noise. After that, it still idles but the moment yo ... more
home Fix label Garden Tools label_important Chainsaws category Husqvarnadone

Fix Fault - Garden Tools

home label Garden Tools label_important Chainsaws

Fix Fault - Garden Tools

home label Garden Tools label_important Chainsaws

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my Regal K6776?
How can I fix my Smeg SPA 42016?
How can I fix my Kia Carens?
How can I fix my Mountfield SP474?
How can I fix my Audi A1?