were to put the door release plug hotpoint wma61?

were does the door release socket fit on the control panel as it came off and fits into two places on the control board

done

How can i mend a Hotpoint WM33 Washing Machine (Error E10)?

How do you go about finding he cause of error code E10 (No cold fill)? Could it be due to blocked drainage?

done

How to replace Hotpoint Washing Machine WD62P Carbon Brushes ?

How do I remove and replace the carbon brushes from my Hotpoint Aquarius WD62P Washer Drier ?

done

why is water running out of the bottom of my washing machine?

water is runnung out the bottom of my washer, when i use it could it be the pump?

done

how can i fix servis 900 washer dryer?

at the end of nearly every wash cycle we notice a horrible stagnent smell coming from drum of machine. we have emptyed trough put in limescale tablets but smell is still there can you tell us what el ... more

done

What is the electrical fault E90 on the Zanussi washer drier ?

What is the nature of the electrical fault that brings on the error code E90 on the Zanussi washer drier.

done

My Zanussi washing machine is jamming mid cycle. ?

I have a Zanussi FLS 1383 W washing machine. Having just moved house, it is sticking mid cycle during the wash phase. Water is going in and out but the cycle does not move on to the next number. Th ... more

done

How can I fix error code 5 on the Hoover Vision 1600?

All cycles/programmes are stopping mid-way and prodcuing an error code number 5 in the display screen. Can anyone advise how to fix this problem?

done

how can I mend my washing machine lock?

Hotpoint 1000 doorlock,will notopen.

done

The drum rocks violently?

I have a Hotpoint 9536 wahing machine that would not spin. I changed the controller board with one that was OK - still no spin. I replaced the motor which ran. After reasembling the machine I loa ... more

done

How can I mend my Hoover Performa 1100?

The normal 40 wash seems to be working but the clothes are coming out after with a soapy residue feel to them and washing powder marks all over. What is causing this problem and how can I fix it?

done

How can I repair the door of my bosch washing machine?

How can I change the glass in the door of my Bosch WFF2000 washing machine?

done

Zanussi Washing Machine displays an error code E90?

My Zanussi Washing Machine displays an E90 error part way through the cycle. You can press start and the cycle continues to end with no further errors

done

how do I change drum bearings ultima 1200?

is there an order of removal

done

How can I change the door catch on my hotpoint aquarius 900?

I am having problems getting the door lugs of the door it self and wondered if there was an easy way to do it with out braking the door.

done

URGENT! How to replace brushes on washing m/c Zanussi FJ1033 ?

My washing machine refuses to spin anymore - it does everything else OK still. I have been advised to change the brushes and wish to carry this out myself. How do I go about this? Do I remove the s ... more

done

HOW CAN I MEND MY BOSCH WOF 1600 WASHING MACHINE?

THE WASHING MACHINE STOPS WHEN IT COMES TO DRAIN TIME WHEN I PLAY WITH THE PROGRAM KNOB AFTER A WHILE IT DRAINS WHEN I WANTED TO DRAIN THE WATER BY LOWERING THE OUT PIPE THE WATER DONT GET OUT THE ... more

done

How do I replace the bearing on my Indesit washing machine?

My Indesit W103 has been making a loud knocking noise on the fastest spin I have been told it is the bearing, has anybody got any ideas how easy this is to do Thanks

done

how can i fix my hoover washing machine?

My hoover ws130-001 washing machine stopped mid cycle (without spinning). The water fills and empties o.k but every time i turn it on it spins 3 or 4 times then stops ! there are no sparks from the mo ... more

done

how will i remove the clicking sound between the tub and its outer shell?

got a daewoo washing machine model dwf-1300SZ. it's still in good condition, but lately whenever the machine starts its spinning process to remove the water, there's a clicking sound between the tub a ... more

done